Dlink Dir 655 router troubleshooting

Dlink DIR-655 router common troubleshooting experiences you can encounter and how to quickly resolve them

Dlink DIR-665 is one of the best wifi routers designed to have advanced technological features. These features give you the best online experience that you could ever want. Also, the ease of use and device reliability are some reasons why you should go for these devices without any second thought. But what happens when the firmware needs an update? To know the steps involved in the dlink DIR-655 firmware update, keep reading. 

You can manually update your dlink DIR-655 firmware within a few minutes. Using the official dlink router address – mydlink.com. Once you are logged in to this website, you will be able to begin your firmware update procedure. 

Update your dlink dir-655 firmware manually

Before you begin, it is important that you download the latest firmware from the support website. You can download it on the computer you are using. If the file is in a zipped form, you can unzip it for the update process.

  • To begin with the dlink DIR-655 firmware update, log in to the dlink setup page through the default web address.
  • Make sure you know the login details of your dlink router account. 
  • Now, go to the d’link web configuration page, find the firmware option and click on it.
  • Click on browse button to upload the donwloaded firmware file.
  • Select the latest firmware file you have downloaded and click on the Open button. 
  • Click on ‘update firmware’ button now.
  • Once the update process is complete, go ahead and click on the “finish” button.
  • The router will now restart itself.

How can I activate dlink dir-655 access point mode with no complicated steps?

Is your house or office facing some serious internet challenge? You can quickly activate your dlink dir-655 access point mode to beat all the connection barriers.

Follow the simple steps below to begin the configuration process:

  • First, plug the router into a power source.
  • Second, connect your computer to the LAN port of your router.
  • Third, open a web browser on your computer and type in the default IP address- into the address bar. Press enter to load the page.
  • You will be redirected to the login page. Input your login credentials. Type “admin” in the username box and leave the password blank.
  • Click on “enter”. If you have already changed your default username and password, you can go ahead and input those.
  • Next, you click on “advanced” and after that, click on “advanced network”.
  • If the “enable UPnP” option is enabled, disable it. 
  • Click on “save settings”.
  • Click “set up”. After that, click “network settings”. 
  • Check the “Enable DHCP server” checkbox and disable it.
  • Finally, click on the “apply changes” button.

How to change your dlink dir-655 default password

Automatically, as part of the way the router has been programmed, it comes with a default password for accessing the setup page. While doing the setup, you are advised to change your login credentials for security purposes. This helps protect the device from unauthorized use. Furthermore, you can be sure that your information security is not compromised.

Below are the quick steps on how to change your dlink dir-655 default password:

  • First, open your browser and access the login page through
  • Moreover, you can also use the web address dlinkrouter.local. 
  • Second, log in with your default username and password.
  • You will now be redirected to the dlink setup wizard page, find the “admin” tab and click on it.
  • Find the default password and set a new password.
  • When finished, click on the “apply changes” to save changes.

When applying a new password, you have to keep two things in mind. First, the password has to be very hard for a stranger to decode. Do this for security purposes. Also, it will be easier for you to remember. You can also note down the details for future reference.

How to do D-Link dir-655 factory reset?

Making a dlink dir-655 factory reset is one of the easiest things to do. You don’t have to be bothered about any complicated technical step. Note that all the personal changes you have made to your router will be wiped off as soon as you initiate the reset program. Furthermore, you can always reconfigure your router network settings using the common setup process. Henceforth, handling the D-Link router reset process is easier.

Things to note down before reset

  • Username and password of your router
  • Username and password of your wifi network
  • Any “port forwarding” that you have enabled
  • And any more important changes that you have made to your router to personalize it

So, let’s get into the dlink dir-655 reset with these easy steps

  • First, ensure that your router is powered all through this reset process.
  • Now, at the back of the router, you will find a small reset button.
  • Press and hold it down for about 10 seconds.
  • After 10 seconds, release the reset button.
  • Automatically, the router will restart itself.
  • Once the restart is done, your router is now back to its default setting. You have completed your dlink dir-665 factory reset.
  • Wait after some time before you begin to set up the router.

If you find out that it did not work, leave it to rest then try pressing the “reset” button again. You want to make sure that the router is powered. By that, it is recommended you plug your router into a power socket since it’s not a rechargeable router.