Setup D-link router

How to Setup Dlink Router?

Experiencing a difficult router setup can be very tasking when there is no proper guide. However, before you abandon your Dlink router, there is a solution. If you have just purchased your Dlink router or you want to set it up from the beginning, you need the best setup guide. Meanwhile, you can carefully observe the causes of the technical problems that you might face, so that you can know how to sort the issue.

First and foremost, check that the browser you are using is updated and has the capacity to load the web link – http://dlinkrouter.local how to setup Dlink router. If you have confirmed this, let’s begin. Note down your network name and passkey in order to link your computer to it. A quick solution for any technical problem faced. Disconnect your router from power and turn it on again. If you notice that nothing has changed, try the process again and again. After a while, if no improvement still, you can go ahead to implement the troubleshooting ideas to help solve the problem. Nevertheless, if none of the tips have not helped, you can resort to reset it. A full guide on the setup process.

Dlink router login http://dlinkrouter.local

  • Place the Dlink router and modem side by side. Using an ethernet cord, attach one of its ends into the router and the other into the modem  
  • Next, plug in both devices into the nearest electric socket. Now plug your extender into a power outlet and turn it on after pausing for some time.
  • Afterward, you will be using another ethernet cord to make a connection between your modem and computer. 
  • Now launch the browser on your computer. In the weblink bar, type in http://dlinkrouter.local. Press “Enter” to proceed with the Dlink router setup.
  • If you find out that the web link is not working, you should try the IP address http://192.168.0.50
  • Lastly, the login page appears before you. There you have to type in the accurate login details and select “Login”.

Web-based method of how to setup dlink router

Setting up through the web can take more time than other means but it is definitely more trusted. Because it allows you to reach more advanced settings of your Dlink router. Implement the setup procedures listed here to complete your setup. 

  • While removing the Dlink router from its pack, be careful. Also, attach any antenna that comes with the pack that might have been detached. 
  • Position your modem and router closely. Using an ethernet cord, insert both of its ends into the modem and Router.  
  • Afterward, plug both devices into the nearest electric socket. Now plug your extender into a power outlet and turn it on after pausing for some time
  • The next thing how to setup Dlink router is to use another ethernet cord to make a connection between your modem and computer.
  • Now launch the browser on your computer. In the weblink bar, type in http://dlink.local. Press “Enter” to proceed.
  • Once you have carefully typed in the web link, press “Enter”. However, if the web link is not connecting, you can use the IP address http://192.168.0.50 
  • Subsequently, you will be on the login page where you have to input the login details into its respective fields. 
  • Select “Login”
  • Selecting the login option takes you to the setup Dlink router page which is also known as the admin page.
  • The good thing is that from this point onwards, you will be directed by the prompt setup instructions from the Setup Wizard.
  • Follow all the procedures to achieve the ultimate setup for your router.
  • Lastly, in addition to the assistance from the Dlink Setup Wizard, you will also get instructions on how to configure your network, change your security details such as network name and password. Kindly follow them carefully.